How Is The Enameled Aluminum Wire Made - News - Xiandeng Holding Group Co.,Ltd

News

How Is The Enameled Aluminum Wire Made

Jul 12, 2018

The first is to pull out the bare copper wire from the rough copper wire through the wire drawing machine, and then paint it several times into the enameled wire through the wrapping machine. The coating machine is divided into three layers. There are heating and drying devices in each layer, two with lacquer device. The bare copper wire is lacquered from the front of the lacquer roller and then into the bake box of the lacquer. After the lacquer roller is lacquered from the lacquer drum then into the bake box of the lacquer machine, the lacquer is then lacquered from the front of the lacquer drum and then into the oven after the lacquer roller. Several times the painting and drying also meet the requirements of enameled wire, but roll on the cylinder. In this way, the enameled aluminum wire is formed.

Model Number	Picture	Specification	Size	Standard	Product Link
Enameled copper wire		PEWR/130	S:3~65mm²	IEC, GB
Enameled copper wire		PEW/130	0.06mm~6.00mm	GB, IEC, JIS
Enameled copper wire		PEWR/155	S:3~65mm²	IEC, GB
Enameled copper wire		UEW/155	0.06mm~2.00mm	GB, IEC, JIS, NEMA
Enameled copper wire		PEW/155	0.06mm~6.00mm	GB, IEC, NEMA, JIS
Enameled copper wire		UEWSB/155	0.06mm~2.00mm	GB, IEC, JIS
Enameled copper clad aluminum wire		UEWSBCCA/180	0.20mm~2.50mm	According to company’s standard or customer’s requirment
Enameled aluminum wire		PEWA/155	0.4mm~5.00mm	GB, IEC, JIS